| |
 |
EtherDevice™ Switch
EDS-518A Series
Industrial 16+2G-port Gigabit Managed Redundant
Ethernet Switches |
|
 |
Quickview |
 |
|
|
|
 |
 |
2 Gigabit plus 16 fast Ethernet ports for copper and fiber |
|
Turbo Ring (recovery time < 20 ms), RSTP/STP
(IEEE802.1W/D) for Ethernet redundancy |
|
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMP V1/V2c/V3, RMON |
|
IEEE802.1X and https/SSL enhance network security |
|
ABC-01 (Automatic Backup Configurator) for system
configuration
backup |
| |
|
|
| |
|
| |
|
Introduction |
|
|
| |
EDS-518A is a standalone 18-port managed Ethernet switch that
provides 2 combo gigabit ports with built-in RJ45 or SFP ports for
gigabit optic communication. The Ethernet Redundant Turbo Ring
(recovery time < 20 ms) increases the reliability and speed of your network backbone. EDS-518A also supports intelligent network
management functions, including QoS, IGMP Snooping/GMRP, VLAN,
Port Trunking, SNMP V1/V2c/V3, IEEE802.1X, and https/SSL.
Technology Tutorials >>
|
|
 Back to Top |
|
Features |
|
|
|
 |
Industrial Networking Capability |
| |
|
Redundant Ethernet Ring (recovery time < 20 ms at
full load) and RSTP/STP (IEEE802.1W/D) |
| |
|
IGMP Snooping and GMRP for filtering multicast traffic from
industrial Ethernet Protocols |
| |
|
Port based IEEE802.1Q VLAN and GVRP protocol to ease network
planning |
| |
|
QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism |
| |
|
802.3ad, LACP for optimum bandwidth utilization |
| |
|
IEEE802.1X and https/SSL to enhance network security |
| |
|
SNMP V1/V2c/V3 for different levels of network management |
| |
|
RMON for efficient network monitoring and proactive capability |
|
|
Designed for Industrial Applications |
| |
|
Bandwidth management prevents unpredictable network status |
| |
|
ABC-01 (Automatic Backup Configurator) for
system configuration backup |
| |
|
Port Lock for access from unauthorized MAC address |
| |
|
Port mirroring for online debugging |
| |
|
Automatic warning by exception through email, relay output |
| |
|
Digital inputs to integrate sensors and alarms with IP
networks |
| |
|
Automatic
recovery of connected device's IP addresses |
| |
|
Line-swap fast recovery |
| |
|
Redundant, dual DC power inputs |
| |
|
IP30, rugged high-strength case |
| |
|
Long-haul transmit distance of 40 km or 80 km |
| |
|
DIN-Rail or panel mounting capability |
| |
|
Ping commands to identify network segment integrity |
| |
|
Redundant 12-45 VDC power inputs and over current protection |
|
|
Recommended Software and Accessories |
| |
|
ABC-01 RS-232 RJ45-based Automatic Backup Configurator |
| |
|
EDS-SNMP OPC Server Pro |
| |
|
DR series DIN-Rail 24 VDC power supplies |
|
|
| |
Back
to Top
|
|
Specifications
|
|
|
|
| Technology |
|
|
|
| IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1W, 802.1Q,
802.1p, 802.1X, 802.3ad, 802.3z |
|
|
|
|
| IGMP V1/V2/V3 device, GMRP, GVRP, SNMP V1/V2c/V3,
DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP,
RARP, RMON |
|
|
|
|
| MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
|
|
|
|
| IEEE802.3x flow control, back pressure flow control Interface |
|
|
|
|
| |
| Interface |
|
|
|
| 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed |
|
|
|
|
100BaseFX(SC/ST connector), and optional
1000BaseSX/LX/LHX/ZX (LC connector) |
|
|
|
|
|
|
|
| PWR1, PWR2, FAULT, 10/100M (TP port),
100M (Fiber port), MASTER, COUPLER |
|
|
|
|
| Two relay outputs with current carrying
capacity of 1A @ 24 VDC |
|
|
|
|
Two inputs with the same ground, but
electrically isolated from the electronics
+13 to +30V for state “1”
-30 to +3V for state “0”
Max. input current: 8 mA |
|
|
|
|
| |
| Optical Fiber |
| 100BaseFX |
|
|
|
Multi mode:
0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)
Single mode:
0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125 μm, 19 PS/(nm*km)) |
|
|
|
|
Multi mode:
-20 dBm
Single mode:
0 to 40 km, -5 dBm
0 to 80 km, -5 dBm |
|
|
|
|
Multi mode:
-14 dBm
Single mode:
0 to 40 km, 0 dBm
0 to 80 km, 0 dBm |
|
|
|
|
Single mode:
-36 to -32 dBm
Multi mode:
-34 to -30 dBm |
|
|
|
|
| |
| Optical Fiber |
| 1000BaseSX/LX/LHX/ZX |
|
Multi mode:
1000BaseSX
0 to 500 m, 850 nm (50/125 μm, 400 MHz*km)
0 to 275 m, 850 nm (62.5/125 μm, 200 MHz*km)
1000BaseLX
0 to 1100 m, 1310 nm (50/125 μm, 800 MHz*km)
0 to 550 m, 1310 nm (62.5.125 μm, 500 MHz*km)
Single mode:
1000BaseLX
0 to 10 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km))
1000BaseLHX
0 to 40 km, 1310 nm ((9/125 μm, 3.5 PS/(nm*km)))
1000BaseZX
0 to 80 km, 1550 nm ((9/125 μm, 19 PS/(nm*km)) |
|
|
|
|
| SFP-1GSXLC: |
-9.5 dBm |
| SFP-1GLXLC: |
-9.5 dBm |
| SFP-1GLHXLC: |
-4 dBm |
SFP-1GZXLC: |
0 dBm |
|
|
|
|
| SFP-1GSXLC: |
-4 dBm |
| SFP-1GLXLC: |
-3 dBm |
| SFP-1GLHXLC: |
+1 dBm |
SFP-1GZXLC: |
+5 dBm |
|
|
|
|
| SFP-1GSXLC: |
0 to -18 dBm |
| SFP-1GLXLC: |
-3 to -20 dBm |
| SFP-1GLHXLC: |
-3 to -24 dBm |
SFP-1GZXLC: |
-3 to -24 dBm |
|
|
|
|
| |
| Power |
|
|
|
| 24 VDC (12 to 45 VDC), redundant dual inputs |
|
|
|
|
0.51A (EDS-518A),
0.61A (EDS-518A-MM,
EDS-518A-SS) |
|
|
|
|
| Two removable 6-pin terminal blocks |
|
|
| Overload Current Protection |
|
|
| Reverse Polarity Protection |
|
|
|
|
| |
| Mechanical |
|
|
|
|
|
|
|
|
|
|
|
|
| DIN-Rail, Wall Mounting (optional kit) |
|
|
|
|
| |
| Environmental |
|
|
|
0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for T models |
|
|
|
|
| -40 to 85°C (-40 to 185°F) |
|
|
| Ambient Relative Humidity |
|
| 5% to 95% (non-condensing) |
|
|
|
|
| |
| Regulatory Approvals |
|
|
|
| UL508, UL60950, CSA C22.2 No. 60950-1, EN60950-1 |
|
|
|
|
UL/cUL Class I, Division 2, Groups A, B, C and D (Pending),
ATEX Class I, Zone 2, Ex nC IIC (Pending) |
|
|
|
|
|
|
|
| FCC Part 15, CISPR (EN55022) class A |
|
|
|
|
EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 2
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11 |
|
|
|
|
|
|
|
|
|
|
|
240,000 hrs
Database: Telcordia (Bellcore), GB |
|
|
|
|
|
|
|
| |
|
|
Ordering
Information
|
|
|
| |
| Standard Operating Temperature Models (0 to 60°C) |
 EDS-518A |
|
| Industrial Gigabit Managed Redundant Ethernet Switch with 16 10/100BaseT(X) ports, 2 combo 10/100/1000BaseT(X) / SFP (mini-GBIC) ports |
|
| EDS-518A-MM-SC |
|
| Industrial Gigabit Managed Redundant Ethernet Switch with 14 10/100BaseT(X) ports, 2 multi mode 100BaseFX ports, SC connector, and 2 combo
10/100/1000BaseT(X) / SFP (mini-GBIC) ports |
|
| EDS-518A-MM-ST |
|
| Industrial Gigabit Managed Redundant Ethernet Switch with 14 10/100BaseT(X) ports, 2 multi mode 100BaseFX ports, ST connector, and 2 combo
10/100/1000BaseT(X) / SFP (mini-GBIC) ports |
|
| EDS-518A-SS-SC |
|
| Industrial Gigabit Managed Redundant Ethernet Switch with 14 10/100BaseT(X) ports, 2 single mode 100BaseFX ports, SC connector, and 2 combo 10/100/1000BaseT(X) / SFP (mini-GBIC) ports |
|
| EDS-518A-SS-SC-80 |
|
| Industrial Gigabit Managed Redundant Ethernet Switch with 14 10/100BaseT(X) ports, 2 long-haul (80 km) single mode 100BaseFX ports, SC connector, and 2 combo 10/100/1000BaseT(X) / SFP (mini-GBIC) ports |
|
| SFP-1GSXLC |
|
| Small form factor pluggable transceiver with 1000BaseSX, LC, 0.5 km |
|
| SFP-1GLXLC |
|
| Small form factor pluggable transceiver with 1000BaseLX, LC, 10 km |
|
| SFP-1GLHXLC |
|
| Small form factor pluggable transceiver with 1000BaseLHX, LC, 40 km |
|
| SFP-1GZXLC |
|
| Small form factor pluggable transceiver with 1000BaseZX, LC, 80 km |
|
| SFP-1G10ALC |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1310 nm, RX 1550 nm |
|
| SFP-1G10BLC |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1550 nm, RX 1310 nm |
|
| SFP-1G20ALC |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission, TX 1310 nm, RX 1550 nm |
|
| SFP-1G20BLC |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission, TX 1550 nm, RX 1310 nm |
|
| SFP-1G40ALC |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission, TX 1310 nm, RX 1550 nm |
|
| SFP-1G40BLC |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission, TX 1550 nm, RX 1310 nm |
|
|
|
| |
| Extended Operating Temperature Models |
|
| EDS-518A-T |
|
| Industrial Gigabit Managed Redundant Ethernet Switch with 16 10/100BaseT(X) ports, 2 combo 10/100/1000BaseT(X) / SFP (mini-GBIC) ports, -40 to 75°C |
|
| SFP-1G10ALC-T |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1310 nm, RX 1550 nm, -40 to 85°C |
|
| SFP-1G10BLC-T |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1550 nm, RX 1310 nm, -40 to 85°C |
|
| SFP-1G20ALC-T |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission, TX 1310 nm, RX 1550 nm, -40 to 85°C |
|
| SFP-1G20BLC-T |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission, TX 1550 nm, RX 1310 nm, -40 to 85°C |
|
| SFP-1G40ALC-T |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission, TX 1310 nm, RX 1550 nm, -40 to 85°C |
|
| SFP-1G40BLC-T |
|
| WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission, TX 1550 nm, RX 1310 nm, -40 to 85°C |
|
|
|
| |
| Optional Accessories |
|
|
|
| Automatic Backup Configurator via RS-232 Console Port, 0 to 60°C |
|
|
|
| CD with EDS-SNMP OPC Server Software and Manual |
|
|
|
| 45W/2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input |
|
|
|
| 75W/3.2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input |
|
|
|
| 120W/5A DIN-Rail 24 VDC Power Supply with 88 to 132 VAC/176 to 264 VAC input by switch |
|
|
WK-46
|
|
|
|
|
| |
|
|
|
